REKKR

REKKR

£150
VAT already included
In Stock

Want to add speaker capability to your desktop? Meet Rekkr, a tiny, Magni-sized amp that’s dead-quiet, powerful enough for satisfying nearfield listening, and packed with leading technology and advanced protection for exceptional performance and reliability.

Less Power, More Better

There are plenty of big-number amps out there, but how much of that do you really use? How loud before the neighbors complain? How old does the constant hiss of a high-gain amp get with the speakers a few feet away? Rekkr was designed to deliver exceptional performance, without the downsides. Or, as we put it: less power, more better.

Exotic, Fully Discrete Topology

Rekkr may be tiny, but that doesn’t mean it skimps on quality. It features an exotic, fully discrete, current feedback gain stage, beefy 10A rated output devices, and a fully linear power supply—including stacked rails for greater efficiency and 12,000uF of filter capacitance. No Class D, no switching supplies, no fans.

Flexible for Desktop and Beyond

Combine Rekkr with any of our headphone amps to add power for nearfield monitors. It stacks perfectly with Magni, Modi, and Vali. Want more power? You can switch Rekkr to mono and run two, palm-sized monoblocks!

Designed and Built in Texas—For Real

By "designed and built in Texas" Schiit make Rekkr in there Corpus Christi facility, and the vast majority of the total production of the Rekkr chassis, boards, transformers, assembly, etc—are manufacturing in the US. The chassis are made in California. The PCBs are done in Nevada. You get the picture: they are not just putting in the final screw here. 

2-Year Warranty

Rekkr is covered by a 2-year UK limited warranty that covers parts and labour. 

Power Output:

Stereo, 8 Ohms: 2W RMS per channel
Stereo, 4 Ohms: 3W RMS per channel
Mono, 8 ohms: 4W RMS 

Frequency Response: 20Hz-20Khz, +/-0.01db, 3Hz-500KHz, +/-3dB

THD: <0.001%, 20Hz-20KHz, at 1V RMS into 8 ohms 

IMD: <0.001%, CCIR, at 1V RMS into 8 ohms

SNR: >120dB, A-weighted, referenced to full output 

Damping Factor: >100 into 8 ohms, 20-20kHz

Gain: 4 (12dB)

Input Sensitivity: AKA Rated Output (Vrms)/Rated Gain. Or, 4/4. You do the math.

Input Impedance: 20k ohms SE

Crosstalk: >80dB, 20-20kHz

Inputs: L/R RCA jacks for stereo input, switch for mono input on R jack

Topology: fully discrete, fully complementary current feedback, no capacitors in the signal path

Oversight: over-current and over-temperature sensors with relay shut-down for faults

Power Supply: 6VAC, 2A wall-wart, 12,000uF filter capacitance, plus boosted, regulated supply to input, voltage gain and driver stages

Power Consumption: 12W maximum 

Size: 12.7 x 8.9 x 3.18 cm

Weight: 0.45 Kgs

    Bad           Good