Please Note ... REFER TO GUIDES SECTION FOR MORE STOCK INFORMATION (no change as from the 1st May 2022). Any other enquiry please send email to

RAGNAROK 2 With Multibit Dac

RAGNAROK 2 With Multibit Dac

VAT already included
Out Of Stock

Schiit Ragnarok 2 With MultibitDac

Schiit Ragnarok 2 is a modular, remote-controlled integrated amp

Ragnarok 2 is the only modular, remote-controlled integrated amp that’s a great match for both speakers and headphones. Delivering full speaker power to the balanced headphone outputs, and debuting Schiit's all-new Nexus™ differential gain stage, Ragnarok delivers performance that completely befits its name—in Norse legend, Ragnarok was the “end of the world.”

Modular Flexibility, Remote Convenience

Ragnarok 2 has two module slots that accept the same modules that many of the other products use, for flexibility and future upgradability. You can order Ragnarok 2 in one of two ways to suit your needs

Just An Amp with two RCA input modules installed, for a total of two balanced inputs and three RCA inputs, ready for you to add all your line-level sources

Fully Loaded with a MM phono preamp and a Multibit DAC, for a total of two balanced inputs, one RCA line-level input, one RCA phono input, and one USB DAC input—a single integrated solution for a variety of analog and digital needs

Both versions come with a standard milled aluminium remote control that allows you to select source, control volume, select headphone or speaker output, mute, and set gain.

Nexus™: One Stage To Rule Them

Ragnarok 2 debuts Schiit's unique differential Nexus™ gain stage for seamless interaction between single-ended and balanced sources. Nexus converts single-ended inputs to balanced outputs, and balanced inputs to single-ended outputs—in a single gain discrete gain stage, without gain differences between modes, and with good performance in all modes.

Power and Control for Speakers and Headphones

Ragnarok 2 delivers 60W into 8 ohms and 100W into 4 ohms, for excellent performance with most speakers. It also delivers full power through the balanced headphone jack (24W into 32 ohms) and quarter-power output from the single-ended headphone jack (6W into 32 ohms). With selectable gains of 1, 8, and 25, it’s compatible with a wide range of speakers and headphones.

Easiest 128-Step Relay-Switched Volume, Ever

The benefits of a relay-switched stepped attenuator for volume are clear. Compared to a potentiometer, they give you essentially perfect channel matching and near-unmeasurable distortion. However, some preamps with relay-stepped attenuators confuse you with buttons and screens. Not Ragnarok 2. Ragnarok 2 has a volume knob that works just like a volume knob—just grab and turn. And if you use the remote control, the motorised potentiometer changes to match the remote setting.

Designed and Assembled in USA

By “designed and assembled in USA" the vast majority of the total production chassis, boards, transformers, assembly,are companies manufacturing in the US. 

Ragnarok 2 is covered by a 5-year limited warranty that covers parts and labour.

Power Output, Speaker Outputs:

8 Ohms: 60W RMS per channel

4 Ohms: 100W RMS per channel

Power Output, Balanced Headphone Output:

32 Ohms: 24W RMS per channel

50 Ohms: 15W RMS per channel

300 Ohms: 3W RMS per channel

600 Ohms: 1.5W RMS per channel

Power Output, Single-Ended Headphone Output

32 Ohms: 6W RMS per channel

50 Ohms: 3.75W RMS per channel

300 Ohms: 750mW RMS per channel

600 Ohms: 375mW RMS per channel

Frequency Response: 20Hz-20Khz, -0.1db, 3Hz-350KHz, -3dB

THD: <0.01%, 20Hz-20KHz, at 100W RMS into 8 ohms

IMD: <0.01%, CCIR, at 100W RMS into 8 ohms

SNR: >115db, A-weighted, referenced to full output 

Damping Factor: >80 into 8 ohms, 20-20kHz

Gain: 1, 8, or 25

Input Impedance: 10k ohms

Crosstalk: >95dB, 20-20kHz


(2) pairs XLR balanced inputs

(1) RCA single-ended input

(2) Module slots, one small and one large

Topology: Nexus™ differential current feedback with nested differential stages 

Oversight: microprocessor-controlled monitoring and management of critical operational points, with relay shut-down for DC, overcurrent, thermal, and other faults

Power Supply: 600VA transformer with dual mono main rails, plus boosted, regulated supply to input, voltage gain and driver stages, plus separate, isolated and regulated rails for microprocessor management. 

Power Consumption: 500W maximum 

Size: 40.64 x 33 x 9.85 cm

Weight: 14.5 Kgs

    Bad           Good