Please Note: No Manufacturing Supply Date means we do not know when we are getting more due to the Virus, sorry we have no more information than this. Any questions please send email to

LYR3 Multibit GRADED

LYR3 Multibit GRADED

VAT already included
In Stock

Schiit Lyr3 Graded Stock With Multibit Card

Lyr3 Repaired by Schiit USA with 3 years warranty 

**These units also take 1 - 2 days to ship as we have to take them to the warehouse to pack and ship as these unit are not a normal stocked item.**

*** This unit might have small scratches or imperfections***


To improve on Lyr 2, we had to completely reinvent the amp, introduce two new technologies, and make it modular. Yes, that’s right. Not only is the new Lyr 3 a big sonic upgrade, it can be configured with the DAC or phono preamp of your choice or keep it just as a headphone amplifier.

Want to run IEMs? Sure. Need power for your HE-6? Sure. If this means nothing to you, just be confident that you can plug any headphone into Lyr 3 and get great sound. With full power delivered from the standard 6.3mm jack, you don’t need balanced headphones to take full advantage of Lyr 3.

Unparalleled Flexibility

Select from the internal card or rear-panel analog input, and pick high or low gain with convenient front switches. Connect the preamp output to your powered monitors for a complete desktop system—or use it as a front end to your speaker power amplifier. Lyr 3 provides all the flexibility you need.

Single Tube, Two Complementary Technologies

Now, you can enjoy a serious tube amp—that only requires a single tube. Our Coherence™ hybrid topology makes the most out of the supplied 6N8S tube, and also works with all new-production 6SN7 tube types. What’s more, Lyr 3 introduces Continuity™—a constant transconductance output stage which provides superior performance.

Configure Now, Ready For the Future

Select from two different DAC modules, a phono input module, or no module at all to tailor Lyr 3 exactly to your needs. Modular design means Lyr 3 won’t be dumpster-fodder when technology changes—just swap a card!

Multibit DAC Module.

Choose the optional Multibit DAC Module to get Schiit’s unique digital filter and multibit DAC architecture, as used in Modi Multibit, for $200.

AK4490 DAC Module.

Or choose the more affordable AK4490 DAC module for a world-class delta-sigma DAC for only $100.

Or, choose the MM phono input module, for 42dB of gain and passive RIAA, for great phono sound, at only $100.

The vast majority of the production of the Lyr 3—chassis, boards, assembly, etc—is manufactured in the US.

Frequency Response: 20Hz-20Khz, -0.1db, 2Hz-700KHz, -3dB

Maximum Power, 16 ohms: 9.0W RMS per channel

Maximum Power, 32 ohms: 6.0W RMS per channel (7.5W at <1% THD typical, one channel driven)

Maximum Power, 50 ohms: 4.0W RMS per channel

Maximum Power, 300 ohms: 900mW RMS per channel

Maximum Power, 600 ohms: 450mW RMS per channel

THD: <0.007%, 20Hz-20KHz, at 1V RMS, high gain (worst case)

IMD: <0.005%, CCIR at 1V RMS, high gain (worst case)

SNR: >102db, unweighted, referenced to 1V RMS, in gain = 1.5 mode

Crosstalk: < -75dB, 20 Hz-20KHz

Output Impedance: 0.3 ohms, high gain (worst case)

Gain: 7.5 (17.5db) or 1.5 (3.5db), via rear switch

Topology: fully discrete, current-mode non inverting 6SN7 / bipolar hybrid with constant transconductance output stage

Protection: standard muting relay for delayed turn-on and fast turn-off

Power Supply: Two internal power transformers with 72VA total rating, plus with over 55,000uf of filter capacitance

Power Consumption: 30W

Size: 22.86 x 15.24 x 5.72 Cm

Weight: 2.72 Kgs

*All measurements made on a Stanford Research SR1+ Audio Analyzer

    Bad           Good