Please Note ... WE AIM TO SHIP THE SAME DAY BUT DUE TO COVID WAREHOUSE RESTRICTION YOUR ORDER MIGHT SHIP THE FOLLOWING DAY . *** Refer to Guides for stock information (no change as from the 8th April 2021) *** Any other enquiry please send email to

JOTUNHEIM (Clearance)

JOTUNHEIM (Clearance)

VAT already included
In Stock

Schiit Jotunheim (Clearance)

Schiit Jotunheim Clearance 

**These units also take 1 - 2 days to ship as we have to take them to the warehouse to pack and ship as these unit are not a normal stocked item.**

*** These unit might have small imperfections***

Note: These units Do Not Have Dac's

Schiit Jotunheim is the most Versatile Headphone Amplifier and Dac

You've been asking for a one-box, do-all, no-excuses desktop system that is ready for any headphone and powered monitor on the planet. We think we have it. At the same time, why don't we make this whole combined DAC/amp  idea seem really outdated? Done and done. Welcome to the Schiit Jotunheim!


Don't get stuck when DAC technology changes,choose the Schiit Jotunheim and be ready for today, and the future. Configure the Schiit Jotunheim to your needs: use it as just an amp, or add an internal USB / Multibit DAC or Moving Magnet phono preamp. In the future, you'll be able to easily upgrade to a different module,maybe even something beyond a DAC or phono preamp.

Ready For Any Headphone

IEMs? Sure. HE-6? Sure. If this means nothing to you, just be confident that you can plug any headphone into Jotunheim and get great sound, with ultimate power and authority. Balanced or single-ended,it doesn't matter. With 5W output into 32 ohms from the balanced outputs, Schiit's Jotunheim has tons of power to spare.

Ready for Any Powered Monitor or Power Amp

Balanced and single-ended preamp outs mean that the Schiit Jotunheim is ready for any powered desktop monitor,or to plug into those expensive monoblocks you've been eyeing.

Unrivaled Flexibility

Select high or low gain with the flick of a front-panel switch, for compatibility with both easy-to-drive and hard-to-drive headphones. Select balanced input, single-ended input, add an optional USB DAC or Multibit DAC, MM phono, or input module:

Multibit DAC Module. Choose the optional Multibit DAC Module to get Schiit’s unique digital filter and multibit DAC architecture, as used in Modi Multibit.

AK4490 DAC Module. Jotunheims optional DAC module uses two AK4490 DACs in a hardware-balanced configuration, with a passive-filtered output stage and asynchronous USB Gen 2 input. Add it to Jotunheim for a true best of both worlds amp and USB DAC.

Moving Magnet Phono Input Module. Or, choose the optional MM phono input module, for 42dB of gain and exceptional low-noise performance from a phono stage with fully passive RIAA, for great phono sound right on your desk.

Made in USA.

3 Year Warranty

Jotunheim is covered by a 3-year limited warranty that covers parts and labour. 

Windows Drivers and Setup

Amplifier's Frequency Response: 20Hz-20Khz, -0.1db, 2Hz-700KHz, -3dB

Balanced Headphone Output: 

Maximum Power, 16 ohms: 7500mW
Maximum Power, 32 ohms: 5000mW
Maximum Power, 50 ohms: 3000mW
Maximum Power, 300 ohms: 900mW
Maximum Power, 600 ohms: 500mW

Single-Ended Headphone Output:

Maximum Power, 16 ohms: 2500mW
Maximum Power, 32 ohms: 1500mW
Maximum Power, 50 ohms: 800mW
Maximum Power, 300 ohms: 350mW
Maximum Power, 600 ohms: 175mW

THD: 0.001%, 20Hz-20KHz, at 1V RMS
IMD: 0.0015%, CCIR
SNR: 109db, A-weighted, referenced to 1V RMS
Crosstalk: -70dB, 20 Hz-20KHz
Output Impedance: Less than 0.1 ohms, balanced or SE, at both gain settings
Gain: (6dB) or 8 (14dB), selectable via front switch
Inputs: Balanced XLR and Single-Ended RCA, selectable via front switch
Outputs: Balanced headphone (4-pin XLR), single-ended headphone (1/4 Jack), balanced line preamp, single-ended line preamp
Gain Stage: Proprietary Schiit Pivot Point, fully discrete differential current-feedback topology
Power Supply: One 48VA transformer with 6 stages of discrete or integrated regulation and over 70,000uF total filter capacitance

Optional Dual AK4490 DAC:

USB Input Receiver: C-Media CM6631A
D/A Conversion IC: AK4490 x 2
Analog Output: fully differential, passive summing and passive filtering
Frequency Response: 20Hz-20KHz, +/-0.1dB, 2-100kHz, -3dB
Maximum Output: 2.0V RMS
THD: <0.0015%, 20Hz-20KHz, full scale
IMD: <0.002%, CCIR
S/N: >106dB, referenced to 2V RMS, unweighted

Optional Multibit DAC:

USB Input Receiver: C-Media CM6631A
D/A Conversion IC: Analog Devices AD5547
Digital Filter: Schiit Comboburrito Time- and Frequency-domain Optimized DSP filter
Input Capability: up to 24/192
Analog Output: fully differential, active summing and filtering
Frequency Response: 20Hz-20KHz, +/-0.25dB, 2-100kHz, -3dB
>IMD: <0.006%, CCIR
S/N: >109dB, referenced to 2V RMS, unweighted

Optional Passive Filtered Phono Stage:

Gain: 42dB
THD: <0.01%, A-weighted, at 1V RMS
SNR: >80dB, A-weighted, inputs shorted
Crosstalk: -70dB, 20-20kHz
Sensitivity: 2.3mV for 400mV output
Overload Margin: >20dB
Input Impedance: 47k ohms 
Input Capacitance: 100pf
RIAA Accuracy: +/- 0.25dB, 20-20kHz
Topology: Fully passive RIAA network with AD8599 gain stages and PET film capacitors throughout, DC coupled, with DC servo

Power Consumption: 25W typical

Size: 22.86 x 15.24 x 5.08 cms

Weight: 2.27 Kgs

*All measurements made on a Stanford Research SR1+ Audio Analyzer
    Bad           Good