MANI

MANI

£140
VAT already included
In Stock

Schiit Mani

Schiit Mani Phono Stage gives you high performance at low cost 

Schiit Mani gives you the flexibility you need for both moving-magnet and moving-coil cartridges, together with exceptionally accurate, low-noise performance for far less than you'd expect!

Accepting All Cartridges!

Many low-cost phono preamps are only good for typical moving-magnet (MM) cartridges. They don't have the gain needed for moving coil (MC), or the flexibility for high-output MM cartridges like Decca, or high-output MC cartridges that that might end up somewhere in the middle of the gain range. Schiit's Mani, with 4 switchable gain modes, (30, 42, 47, and 59dB) is ready for any cartridge you can throw at it.

Accurate, Quiet Passive RIAA Network

Schiit Mani's RIAA network is implemented fully passively. What that means is there are no poles in the feedback loop, for more consistent sonic performance. Coupled with precision 2% film capacitors, 0.5% thin-film resistors, and super low-noise gain stages, Schiit Mani delivers superb accuracy and performance, even well beyond its modest price.

Made in USA

By made in USA, we mean made in USA. That goes for everything we make. No excuses. No assembled in USA. Yes, the wall wart is from China, but hey, it's still a small part of the cost.

Mani is covered by a limited warranty that covers parts and labour for two years.

Gain 1 = Low, Gain 2 = Low (Decca Mode) Gain 30db

THD: <0.005%, A-weighted, at 1V RMS

SNR: >90dB, A-weighted, inputs shorted

Crosstalk: -75dB, 20-20kHz

Sensitivity: 9mV for 300mV output

Overload Margin: >20dB


Gain 1 = Low, Gain 2 = High (Standard MM Mode) Gain: 42dB

THD: <0.008%, A-weighted, at 1V RMS

SNR: >82dB, A-weighted, inputs shorted

Sensitivity: 2.3mV for 300mV output


Gain 1 = High, Gain 2 = Low (Low MM/High MC Mode) Gain: 48dB

THD: <0.01%, A-weighted, at 1V RMS

SNR: >80dB, A-weighted, inputs shorted

Sensitivity: 1.3mV for 300mV output


Gain 1 = High, Gain 2 = High (MC Mode) Gain: 59dB

THD: <0.03%, A-weighted, at 1V RMS

SNR: >70dB, A-weighted, inputs shorted

Sensitivity: 0.3mV for 300mV output


Input Impedance: Selectable 47 ohms or 47k ohms

RIAA Accuracy: +/- 0.2dB, 20 hz - 20 khz

Output Impedance: 75 ohms

Power Supply: a wall wart style 16VAC transformer

Power Consumption: 4W

Size: 12.7 x 8.9 x 3.18 cm

Weight: 0.45 Kgs


*All measurements made on a Stanford Research SR1 or SR1+ Audio Analyser

    Bad           Good