Please Note: WE AIM TO SHIP SAME DAY BUT DUE TO COVID WAREHOUSE RESTRICTION YOUR ORDER MIGHT SHIP THE FOLLOWING DAY. No Manufacturing Supply Date means we do not know when we are getting more due to the Virus, sorry we have no more information than this. Any questions please send email to sales@schiit.co.uk

SAGA SOLID STATE

SAGA SOLID STATE

£300
VAT already included
No Manufacturing Supply Date

Schiit Saga S

Schiit Saga is a Single Ended Pre amp with Remote Control

Schiit Saga S is just like Saga+—without the tube. Like Saga+, Saga S gives you all the uber-high-end, no-compromises features you need in a preamp, including a real relay-switched volume control, a switchable DC-coupled discrete JFET buffer, and a custom remote control. 

Saga S: The Solid-State Saga

What is Saga S? It’s simple—it’s basically a Saga+ with a discrete JFET buffer stage in place of the tube stage. We understand some people don’t want to deal with tubes, so we went ahead and made one that was 100% solid state. 

It’s Your Choice: Passive or Active

Go ahead. Run Saga S in passive mode for a convenient remote-controlled passive preamp that’s ideal for many systems. If you need to drive long cables, switch it to the discrete, DC-coupled JFET buffer mode.

Easiest Relay-Switched Volume, Ever

The benefits of a relay-switched stepped attenuator for volume are clear. Compared to a potentiometer, they give you essentially perfect channel matching and near-unmeasurable distortion. However, some preamps with relay-stepped attenuators confuse you with buttons and screens. Not Saga S. Saga S has a volume knob that works just like a volume knob—just grab and turn. And if you use the remote control, the motorized potentiometer changes to match the remote setting. 

Perfect Companion to Schiit DAC's

Want a remote-controlled system to interface your digital gear with the rest of your system? Stack Saga S and Bifrost (or any other DAC's) for a true no-compromise remote-controlled system.

Designed and Assembled In USA

By “designed and assembled in USA" this is what this means: the vast majority of the total production of Saga S—chassis, boards, transformers, assembly, etc—is manufacturing in the US. The chassis are made minutes from Schiit's facility. Their PCBs are done just over the hill from them, or done in North California. 

5-Year Warranty 

Saga S is covered by a 5-year limited warranty that covers parts and labour.

Buffer Stage:

Frequency Response: 20Hz-20Khz, -0.2db, 3Hz-400KHz, -3dB 

THD: <0.001%, 20Hz-20KHz, at 1V RMS 

IMD: <0.001%, CCIR (active stage)

SNR: >110db, A-weighted, referenced to 1V RMS

Output Impedance: 75 ohms

Maximum Output: >5V RMS 

Passive Stage:

Output Impedance: varies, maximum 4.8 kohms

Both Passive or Active Stage:

Gain:  Approximately 1 (0dB) through either passive or active stage

Input Impedance: 10 kohms

Crosstalk: >-75dB, 20Hz-20KHz

Inputs: 5 RCA pairs, selectable via front switch or remote

Outputs: 2 RCA pairs, selectable via front switch or remote 

Discrete two-JFET buffer with DC offset correction

Volume Control: relay-switched stepped attenuator with discrete thin-film resistors , 64 1dB steps

Power Supply: One 24VA transformer with regulated +/-18V rails, plus 5VDC for microprocessor 

Power Consumption: 15W typical

Size: 22.86 x 15.24 x 5.08 cm

Weight: 2.72 Kg


    Bad           Good