Please Note ... REFER TO GUIDES SECTION FOR MORE STOCK INFORMATION (no change as from the 1st May 2022). Any other enquiry please send email to sales@schiit.co.uk

LOKIUS

LOKIUS

£395
VAT already included
Out Of Stock

Schiit Lokius

Schiit Lokius is a high quality 6-Band Balanced Tone Control

Yes, tone control. As in, equaliser. Just like a Loki Mini+, but with 2 more bands and balanced inputs and outputs. And yeah, we know you can get a surgical software EQ, but the 6 knobs here just sit on your desk and beckon. No apps, no graphic confusion with mice or styli. Just tweak the sound to your exact preference, with a super-high-performance, discrete, single-gain-stage, LC-filtered equalizer at your fingertips.

More Bands, More Inputs, Total Flexibility

Lokius has 6 bands of equalisation on tap, together with both balanced and single-ended inputs and outputs. Select the input with a convenient front-panel switch. Choose equalised output, or complete bypass—nothing in the signal path except a relay and a resistor. Lokius integrates with any system, large or small, speaker or headphone, balanced or single-ended, for complete flexibility.

Save an Imperfect Recording—or Make it Better

Is everything you listen to recorded perfectly? Of course not. Some recordings aren’t great. And some speakers and headphones are a bit bright or a bit dark. Lokius lets you adjust for these imperfections. But more than that, you can make your system sound the way you want. Deep bass? Absolutely, Sparkling highs? Yes again! Go ahead treat yourself to your perfect sound.

Enjoy True Transparency

Lokius uses Schiit’s own two-stage load-invariant “super-buffer” topology to drive a single discrete current-feedback gain stage, with a passive inductor-capacitor and gyrator-capacitor network in-between. Lokius features super-high-quality parts, including sealed Alps potentiometers, Wima and Panasonic film capacitors, dual-stage regulation with HF smoothing, 0.5% thin-film resistors, and quality Neutrik connectors. The translation of this tech-speak is that you can forget noisy, veiled equalisers you may have used in the past. Lokius transforms your system without getting in the way, or making itself known. 

Designed and Built in Texas

By “designed and built in Texas" this is what we mean: we design, assemble, test, and QC Lokius in our Corpus Christi, Texas facility.  Our PCBs and cases are done in Nevada. Yes, the wall-warts are made in Taiwan, but there's some give and take at this price point. 

3-Year Warranty

Loki is covered by a limited warranty that covers parts and labour for three years. That’s 3x the coverage of most products in this price range.

Bands: 20Hz, 120Hz, 400Hz, 2kHz, 6kHz, 16kHz

Adjustment: +/-12dB at 20Hz and 16kHz, +/-9dB at 120Hz and 6kHz, +/-6dB at 400 and 2kHz

Maximum Output: 10V RMS (SE), 20V RMS (balanced)

Frequency Response: 20Hz-20Khz, -0.1db, 2Hz-1MHz, -3dB 

THD: Less than 0.0008%, 20Hz-20KHz, at 2V RMS in/out, pots centred, active stage enabled, less than 0.002% at any potentiometer setting

IMD: Less than 0.001%, CCIF

SNR: Greater than 115db, unweighted, referenced to 2V RMS

Crosstalk: -85dB, 20Hz-20KHz

Output Impedance: 75 ohms

Input Impedance: 47K ohms

Topology: discrete, all-bipolar, symmetrical current-feedback design with matched parts throughout, DC coupled, with DC servo, plus dual-stage discrete super-buffer

Filtering: capacitor-gyrator for 20Hz and 120Hz, capacitor-inductor (LC) for all other bands

Power Supply: “Wall wart” style 14-16VAC transformer, dual regulated +/- 17V rails 

Power Consumption: 6W

Size: 15.24 x 22.86 x 3.81 cm

Weight: 900 Gramms

    Bad           Good