Please Note ... REFER TO GUIDES SECTION FOR MORE STOCK INFORMATION (no change as from the 1st May 2022). Any other enquiry please send email to



VAT already included
Out Of Stock

Okay. Let’s blow up this high-end nonsense. Here’s your ultra-high-end amplifier, without the ultra-high-end price. Welcome to the revolution.

No-Excuses Amp, No-Brainer Price

Schiit Vidar is nothing less than a no-excuses, exotic-topology, Class-AB, linear-supply, microprocessor-controlled, power-doubling, dual-mono-ish, intelligently-managed, drives-almost-anything power amp. No Class D, no switching supplies, no fans, no compromises, nothing in the signal path but music—for a three-figure price tag.

Small Size, Big Power

Don’t let the compact size fool you—pick up the Schiit Vidar to get a real feeling for the beefy 600VA transformer inside. Vidar may be small, but it’s also a powerhouse, delivering 100W per channel into 8 ohms, doubling to 200W per channel into 4 ohms.

Stereo or Mono Flexibility

Combine the Schiit Vidar with a single-ended preamp like Saga for a complete system with insane, no-compromise performance—for just a little over a grand. Or, run two Schiit Vidar's from a preamp with balanced outputs (like our Freya) for true mono block performance and 400 watts per channel into 8 ohms.

Intelligent Oversight and Protection

The Schiit Vidar, has a microprocessor that oversees all important aspects of amplifier operation, from DC offset to over-current and over-temperature faults. This provides stable, safe operation without invasive current-limiting, fuses, or active devices in the power supply path. In English, Vidar makes sure it’s operating optimally at all times—and protects itself when it needs to, so you can be assured of excellent performance for a long, long time.

Made in USA. Really.

By “made in USA,” we mean made in USA. 

5-Year Warranty 

Schiit Vidar is covered by a 5-year limited warranty that covers parts and labour.

Power Output:

Stereo, 8 Ohms: 100W RMS per channel

Stereo, 4 Ohms: 200W RMS per channel

Mono, 8 ohms: 400W RMS

Frequency Response: 20Hz-20Khz, -0.1db, 3Hz-500KHz, -3dB

THD: Less than 0.01%, 20Hz-20KHz, at 100W RMS into 8 ohms

IMD: Less than 0.01%, CCIR, at 100W RMS into 8 ohms

SNR: Greater than 125db, A-weighted, referenced to full output

Damping Factor: Greater than 100 into 8 ohms, 20-20kHz

Gain: 22 (27dB)

Input Impedance: 22k ohms SE, 44k ohms balanced

Crosstalk: Greater than 95dB, 20-20kHz

Inputs: L/R RCA jacks for stereo input, single XLR for mono input

Topology: Fully complementary, all-BJT, current feedback, no coupling capacitors or DC servos

Oversight: microprocessor-controlled monitoring and management of critical operational points, including DC offset, with with relay shut-down for overcurrent, thermal, and other faults

Power Supply: 600VA transformer with dual mono main rails, plus boosted, regulated supply to input, voltage gain and driver stages, plus separate, isolated and regulated rails for microprocessor management.

Power Consumption: 700W maximum

Size: 22.86 x 330.2 x 9.84 cm

Weight: 13.61 Kgs

*All measurements made on a Stanford Research SR1+ Audio Analyzer

    Bad           Good