Please Note: No Manufacturing Supply Date means we do not know when we are getting more due to the Virus, sorry we have no more information than this. Any questions please send email to



VAT already included
No Manufacturing Supply Date

Schiit Fulla 3 (in Black only) 

Schiit Fulla 3 is a Combined Headphone Amp / Dac and can even be used for gaming

* Included is a Usb to Micro Usb Cable*

Fulla 3 is pretty much the answer to the question, “What’s the most affordable way I can get into great sound for gaming…and music, too?” Because it’s a great DAC/amp with top-shelf components—that also has a very nice microphone input, too. Fulla 3 is ready for your headphones, your headphone mic, your powered monitors, your analog sources, and more.

Total Flexibility for Gaming and Music

Fulla 3 is a complete DAC/Amp that also integrates a high-quality electret mic input. Plug Fulla 3 into virtually any USB port, connect your headphones and microphone, and you’re set for amazing gaming. But that’s only the start:

Use it as a great music DAC/amp. You don’t need to be a gamer to appreciate the quality of Fulla 3.

Use it as a DAC/preamp. Connect to powered monitors or speaker amps using the variable outputs on the back.

Use it as an amp. Connect your phone (or any other analog source) to the convenient front jack. 

Use it with phones, tablets, or computers with low-powered USB ports. We’ve included a second USB port for power input. Plug in your phone charger (or any other 5V DC source with micro-USB output) and Fulla 3 tells your source it doesn’t need any power.

Top-Shelf Components

Like DACs costing many times its price, Fulla 3 uses the AKM AK4490 D/A converter. Coupled with an Alps RK09 potentiometer, high-quality filter and amp stages from Texas Instruments, as well as precision thin-film resistors and film capacitors, Fulla delivers performance far beyond its modest price. 

Plenty of Headphone Power

Fulla 3 delivers a super punch, up to 400mW into 16 ohms, together with a vanishingly low noise floor and low output impedance. Or, in English, this means it’s a great match for virtually any headphone.

Amazing Mic Input

Your friends may think you’ve started your own podcast when they hear Fulla 3’s 24-bit microphone input with AKM analog-to-digital converter. And, automatic gain control makes the mic adjustment-free and super simple to use.

Designed and Built in California, 2-Year Warranty

By “designed and built in California," this is what we mean: the vast majority of the total production of Fulla 3—chassis, boards, assembly, etc—is manufacturing in the US. The chassis are made minutes from the Schiit facility. The PCBs are done just over the hill from them or done in Nevada. Fulla 3 is also covered by a 2-year limited warranty that covers parts and labour


Frequency Response: 20Hz-20Khz, +/-0.5db 

Maximum Power, 16 ohms: 400mW RMS

Maximum Power, 32 ohms: 250mW RMS

Maximum Power, 50 ohms: 200mW RMS

Maximum Power, 300 ohms: 40mW RMS

THD: <0.002%, 20Hz-20KHz, at 1V RMS

IMD: <0.002%, CCIR

SNR: >105db, A-weighted, referenced to 1V RMS

Crosstalk: >-80dB, 20Hz-20KHz

Output Impedance (headphones): 0.5 ohms

Output Impedance (line out): 75 ohms

Input Impedance (rear 1/8" jack): 10k ohms

Gain: 1.7 (4.6db)

USB Receiver: C-Media CM6631A

DAC: AKM AK4490 with TI OPA1662-based filter stage

Sample Rates and Bit Depths: 16/44.1 to 24/192 supported without drivers on Windows 10, Mac, Linux, Android (UAC 2 device)

Output Stage: TI LMH6643 x 2 (1 per channel) 

Power Supply: Via USB, with +/- 5V rails via high-current dual-polarity switching regulator, with inductor filtering and local regulation

Power Consumption: 0.8W typical

Size: 6.35 x 30.5 x 1.14 cm

Weight: 800 Gramms

    Bad           Good